Marine automation and control spans a wide band of shipboard technology: programmable controllers, alarm and monitoring systems, engine safety and control systems, loading computers, planned maintenance software, personal computers used as HMI panels, and the network and communication components that tie these systems together. In our type-approval register, this basis is built from every product whose DNV product type falls into the programmable controller, monitoring, control, network, computer, engine control, loading computer, planned maintenance, electrical control, remote control, telephone and public address categories - a practical definition of automation and control equipment rather than a single official class.
This overview draws on three of our own data sets: the type-approval register, which lists individual approved products with their certificate group, status and expiry; the equipment library, which holds datasheet-verified technical figures for a much smaller, checked subset of models; and the supplier directory, which lists companies that service or supply automation and control systems in the field. None of these three data sets describes the full world market - each is a register of what is recorded in our own systems, with its own coverage and gaps.
The figures below are aimed at ship technical superintendents, procurement staff, shipyard engineers and service companies who need to check whether a specific controller, HMI, monitoring system or network component carries a current approval, who else makes similar equipment, and where to find sourcing or service support. All figures are as recorded in our systems in September 2026.
Within this basis, our type-approval register holds 902 products from 412 manufacturers. That is a broad supplier base relative to the total product count, though as the manufacturer table further down shows, the largest suppliers carry considerably more than one entry each.
These 902 products fall into three certificate groups. The large majority, 876 products, hold a Type Approval certificate, which is DNV's own product certification scheme. A further 19 products are certified under the Marine Equipment Directive, the EU regime for equipment carried on EU-flagged ships, and 7 products fall under the newer Marine Equipment Regulation, which is progressively taking over that role. In practice, a buyer specifying automation or control equipment for an EU-flagged vessel needs to check which of these three groups actually applies to the product being quoted, since the required paperwork differs between them.
The 902 products are spread unevenly across categories. Some categories are broad and commoditized, with products from dozens of manufacturers; others are narrow, with only a handful of specialist suppliers.
A group of smaller categories rounds out the basis: Condition Monitoring System (9 products, 9 manufacturers), Remote Control System Steering Gear (9 products, 6 manufacturers), Remote Control System Diesel Engine (6 products, 5 manufacturers) and Revolution Monitoring System (4 products, 4 manufacturers). The Marine Equipment Directive group adds three further Public Address and General Alarm System entries covering speakers and control or distribution equipment, with 8, 5 and 4 products respectively from 7, 3 and 4 manufacturers.
Individual products in this basis range from dedicated maritime panel computers, such as Data Respons Solutions AS's MPCF1-10,4" Maritime Panel Computer, to full engine control platforms like Caterpillar Inc.'s MPC300 and network switches such as Moxa Inc.'s EDS-2016-ML Series.
A relatively small number of manufacturers account for a disproportionate share of the register. Moxa Inc., based in the Taiwan Region, holds 26 products in this basis, the single largest count of any manufacturer. Phoenix Contact GmbH & Co. KG (Germany) follows with 19 products, then Data Respons Solutions AS (Norway) with 16, Kongsberg Maritime AS (Norway) with 15, and Zenitel Norway AS avd Horten (Norway) and Weidmüller Interface GmbH & Co. KG (Germany), both with 14. Westermo Network Technologies AB (Sweden) holds 12 products and WAGO GmbH & Co. KG (Germany) holds 11. Mitsubishi Electric Corporation, Nagoya Works (Japan) and Hirschmann Automation and Control GmbH (Germany) each hold 10 products, and Omron Corporation IAB Company (Japan) and Siemens AG SIMATIC Type Test (Germany) each hold 9.
Even Moxa's 26 products are a small slice of the 902 total, so no single manufacturer dominates the basis outright; the pattern is one of a broad supplier base with a moderately concentrated top tier.
By manufacturer country, Germany leads with 93 of the 412 manufacturers in this basis, comfortably the largest single country, followed by Norway with 46, China with 36, the United States of America with 32, the Republic of Korea with 27, Japan with 22, the United Kingdom of Great Britain and Northern Ireland with 19, Denmark with 16, and Sweden and the Netherlands, each with 15. Germany alone accounts for close to a quarter of all manufacturers in this basis, and together Germany, Norway and China account for well over a third of the total - a supplier base concentrated in Europe and East Asia rather than scattered evenly around the world.
Certificate status in this basis skews strongly toward valid: 859 products are recorded as valid, 43 as expired and 3 as revoked. An expired or revoked status does not necessarily mean the underlying product is no longer sold - manufacturers frequently update or renew designs - but it does mean the specific certificate on file should not be relied on without checking directly with the manufacturer or DNV for a current one.
Of the certificates with a recorded expiry year, 141 fall due in 2026, 225 in 2027, 193 in 2028, 130 in 2029, 166 in 2030 and 50 in 2031. The 2027 figure is the single largest cluster, meaning a significant share of currently valid automation and control certificates in this basis will need renewal within the next few years.
For procurement and technical teams, the practical takeaway is straightforward: always request the manufacturer's current certificate rather than relying on a catalog or register listing, and check the expiry date against the vessel's delivery or dry-docking schedule before specifying or ordering. Given that 141 certificates in this basis are already due in 2026 and a further 225 in 2027, equipment sourced against an older certificate carries a real chance of needing a renewed document before the ship is delivered or the class survey is completed.
Our equipment library holds a dedicated Automation & Control category, covering engine room automation, alarm monitoring, and control systems. The category spans equipment types including Alarm Monitoring Systems, DP Systems, Integrated Automation Systems (IAS), Power Management Systems (PMS), Alarm Monitoring & Control Systems (AMCS), Safety Systems (ESD/F&G), Level Switches, Planned Maintenance Systems, Programmable Logic Controllers (PLC) and HMI Panels & Industrial Computers.
Total model counts for this category are not confirmed and are not quoted here; only the datasheet-backed figures are. Within the category, 15 models carry a verified datasheet in our library, and of those, 1 model has fully verified key figures. All 15 datasheet-verified models come from a single manufacturer recorded in the library, Kongsberg Maritime AS, with the Mn1600 as an example model. Buyers can also search for further Kongsberg Maritime AS equipment directly in the library.
Kongsberg Maritime's presence in the type-approval register is broader than the manufacturer table above suggests on its own: under a wider name match, entries associated with Kongsberg Maritime span 12 register entries covering roughly 130 individual product listings, against the 15 products shown for Kongsberg Maritime AS specifically in the automation and control basis. The difference reflects how registrations are grouped and named across the wider register, not a change in the underlying approvals.
Across the automation and control category, our library's service data points to a consistent set of failure patterns:
Service guidance recorded in the library reinforces the point that automation and control systems need active, scheduled attention rather than run-to-failure maintenance. For engine-room automation specifically, Kongsberg's AutoChief is noted as the market leader, with an annual I/O test, a UPS battery check and software updates sourced directly from Kongsberg Maritime. IoT-based advisory systems are flagged as depending on a reliable satellite or 4G connection, with an annual review of the advisory algorithms themselves. More generally, servicing should follow the manufacturer's manual and classification society requirements, with an annual inspection at class survey and spare parts stocked as specified by the manufacturer. Routine checks should cover alarm history, communication status, redundant power supplies, I/O health and cabinet environment, and any test of critical alarms or control transfers should use approved procedures without defeating safety interlocks. Software versions, logic changes and calibration values should be controlled through vessel and manufacturer documentation rather than left to informal records.
Our supplier directory lists 824 firms whose profile mentions automation or control systems. The largest single country group is the United States with 86 firms, followed by China with 62, Greece with 59, South Korea with 46, the United Kingdom and Singapore tied at 43 each, and Norway and Japan tied at 38 each.
In this basis, 902 products from 412 manufacturers are recorded, split across Type Approval (876 products), Marine Equipment Directive (19) and Marine Equipment Regulation (7) certificate groups.
Moxa Inc. leads with 26 products, ahead of Phoenix Contact GmbH & Co. KG with 19 and Data Respons Solutions AS with 16; Kongsberg Maritime AS holds 15 products in this basis specifically, though a wider name match elsewhere in the register links Kongsberg Maritime to 12 register entries and roughly 130 product listings.
Only the figures marked as verified. In the Automation & Control category, that means 15 models with a verified datasheet and 1 model with verified key figures, all currently attributed to Kongsberg Maritime AS; broader model totals for the category are not confirmed and should not be treated as a market size.
Our supplier directory lists 824 firms whose profile references automation or control systems, with the United States, China and Greece as the largest single country groups; individual firms can be checked through their directory profile before being added to an approved supplier list.
This article is provided for general information and education. It does not replace professional advice.
This article was produced with the assistance of an AI system and reviewed by the editorial team before publication. Sources are listed below.
Tell us the manufacturer, the model and what you need — a part, a service call, a second opinion. Our desk asks the right suppliers from a network of over companies and comes back with a quote or a sourcing plan, not a search page.