Every door, hatch cover and window fitted into a ship's hull or superstructure that is meant to keep out water or fire has to carry independent approval before a yard or owner can put it on board. That covers weathertight and watertight doors, horizontal hatches, portlights and side scuttles, and fireproof windows used in accommodation and engine casings. The paperwork behind each of these products sits in our type-approval register, and it is large enough to show real patterns in who makes this equipment, which certificate scheme covers it, and how current the approvals actually are.
This review draws on three of our data sets: the type-approval register, filtered to the DNV product types that cover weathertight and watertight doors, horizontal Class A hatches, general hatches, portlights and side scuttles; our equipment library, which holds datasheet-checked technical detail on hatch cover and cargo access systems; and our supplier directory, filtered to firms whose profile mentions doors, hatches, windows or outfitting. None of these three data sets describes the whole market on its own, and the article says so at every point where that distinction matters.
The intended reader is technical staff at ship management companies, procurement teams at owners and yards, and service providers who need to check whether a quoted product actually holds current approval, and who else besides the incumbent supplier makes the same type of fitting.
What our register covers for doors, hatches and windows
Filtered to weathertight and watertight doors, horizontal Class A hatches, general hatches, portlights and side scuttles, our type-approval register holds 217 products from 50 manufacturers. Those 217 approvals split across four certificate groups: 90 fall under the Marine Equipment Directive, 86 are recorded as Type Approval, 35 sit under the Recreational Craft Directive, and 6 fall under the newer Marine Equipment Regulation.
That split is a reasonable proxy for the segments the register touches. Marine Equipment Directive and Marine Equipment Regulation approvals apply to equipment for SOLAS-class merchant ships trading into the European Union or the United Kingdom, while Recreational Craft Directive approvals cover smaller leisure and workboat fittings. The register mixes both, so a search on "weathertight door" or "hatch" without also checking the certificate group can return a product that was never intended for a merchant vessel, or the other way round.
Product types in the register
Underneath the four certificate groups, the register breaks down into twelve distinct product-type listings. Fireproof windows and side scuttles for the "A" and "B" fire classes are the largest single grouping by product count, but they appear under three separate listings in the data, most likely reflecting different spellings or revision batches carried over from the source register rather than three genuinely different product types:
| A and B class fireproof windows and side scuttles (Marine Equipment Directive)from 16 manufacturers | 63 Produkte |
|---|---|
| Weathertight Door (Type Approval)from 18 manufacturers | 36 Produkte |
| A and B class fireproof windows and side scuttles , second listing (Marine Equipment Directive)from 9 manufacturers | 27 Produkte |
| Watertight Door (Type Approval)from 9 manufacturers | 22 Produkte |
| Horizontal Class A Hatches (Type Approval)from 13 manufacturers | 22 Produkte |
| Portlights (Recreational Craft Directive)from 4 manufacturers | 19 Produkte |
| Hatches (Recreational Craft Directive)from 5 manufacturers | 16 Produkte |
| A and B class fireproof windows and side scuttles (Marine Equipment Regulation)from 2 manufacturers | 5 Produkte |
| Control and monitoring of watertight doors (Type Approval)from 3 manufacturers | 3 Produkte |
| Hydraulic pipe system for watertight doors (Type Approval)from 2 manufacturers | 2 Produkte |
| A and B class fireproof windows and side scuttles , fourth listing (Marine Equipment Regulation)from 1 manufacturer | 1 Produkte |
| Side Scuttles (Type Approval)from 1 manufacturer | 1 Produkte |
On board, weathertight doors close openings above the freeboard deck that are not required to hold back a full head of water, while watertight doors sit at subdivision boundaries below deck and are engineered and tested to a stricter standard. Horizontal Class A hatches and the plain "Hatches" listing cover deck openings and cargo access on general cargo, bulk and offshore vessels. Fireproof windows and side scuttles go into accommodation blocks and engine casings where a fire boundary has to keep its rating even though it also has to let light through. The two small listings for control and monitoring systems and for hydraulic pipe systems are the actuation and remote-operation hardware that goes with watertight doors rather than the doors themselves, and only a handful of manufacturers in the register cover that side of the installation.
Who holds the approvals
Approval holders in the register range from single-product specialists to manufacturers with double-digit product counts. The twelve manufacturers with the most approved products are:
| Wuxi MNET Equipment Tech Co., Ltd. (China) | 26 Produkte |
|---|---|
| Libra-Plast A/S (Norway) | 18 Produkte |
| Wuxi Dongzhou Marine Equipment Co., Ltd (China) | 17 Produkte |
| Man Ship Machinery & Hardware Co. Ltd. (Taiwan Region) | 13 Produkte |
| BOHAMET S.A. (Poland) | 12 Produkte |
| Samgong Co., Ltd. (Republic of Korea) | 12 Produkte |
| Trend Marine Products Limited (United Kingdom of Great Britain and Northern Ireland) | 11 Produkte |
| C.C. Jensen Window A/S (Denmark) | 11 Produkte |
| Winel B.V. (Netherlands) | 10 Produkte |
| Wuxi Xinfan Marine Equipment Co., Ltd. (China) | 8 Produkte |
| Rutgerson Marin AB (Sweden) | 8 Produkte |
| QINHUANGDAO XINGYANG MARINE FITTING CO., LTD. (China) | 7 Produkte |
By country of manufacturer, China leads with 13 manufacturers holding approvals in this register, ahead of Norway with 9, Germany with 6, the Republic of Korea with 5, Taiwan Region and Finland with 3 each, and the United Kingdom, Poland and Italy with 2 each; Sweden accounts for 1. China's lead in manufacturer count lines up with three Chinese firms sitting inside the top four approval holders by product volume, so the country's presence in the register is broad as well as deep. At the same time, the top twelve list is not dominated by a single country: Norway, Taiwan Region, Poland, the Republic of Korea, the United Kingdom, Denmark, the Netherlands and Sweden all place at least one manufacturer among the higher-volume holders, so a buyer looking for a second source rarely has to leave the register to find one.
Validity and expiry
Of the 217 certificates in this register, 214 are recorded as valid and 3 as expired. Expiry dates cluster in a five-year band: 14 certificates run out in 2026, 41 in 2027, 41 in 2028, 41 in 2029 and 44 in 2030, tailing off to 12 in 2031. A further 12 certificates carry an expiry date of 2047, and single certificates are dated to 2037 and 2049. A small cluster of entries carries nominal expiry dates far in the future — 2053, 2070, 2071, 2072 and 2073 — and these should be treated with caution rather than taken as planning dates.
For a buyer or surveyor, the practical read is straightforward. A product being listed in the register is not the same as its certificate being valid today: 3 entries already show as expired, so the current certificate should be requested and checked against the register status rather than assumed. The 2027 to 2030 expiry cluster is worth flagging specifically against any newbuilding or retrofit schedule that runs past those years, since a certificate renewal mid-contract can affect delivery. And any certificate dated 2050 or later should be queried with the manufacturer directly before it is used to justify a purchasing decision.
What the equipment library adds
Alongside the type-approval register, our equipment library carries a dedicated category for Hatch Covers & Cargo Access, sitting under the deck department (Hatch Covers & Cargo Access). This category is broader than the deck-opening hatches in the type-approval register: it covers powered cargo-access systems rather than the fire- and watertight door and window fittings above. The equipment types tracked in this category are:
- Folding Hatch Cover
- Sliding Hatch Cover
- Side-Rolling Hatch Cover
- Ramp (Stern/Side)
- Pontoon Hatch Cover
- RoRo Ramp
- Piggyback Hatch Cover
Total model counts for this category are not reliable enough to quote, so only the datasheet-checked figures are used here: 1 model in this category has a verified datasheet on file, and 0 models have verified key figures. The manufacturer behind that datasheet-backed entry is MacGregor, with the example model MacGregor Hatch cover control systems, and further models from the same maker can be checked through the MacGregor search results. MacGregor also appears on the type-approval side of the data: matching the manufacturer name against the 217 products in the register turns up 5 entries, so the same name covers both physical door, hatch and window products with independent type approval and cargo-access control systems tracked in the equipment library.
The library also records the failure modes seen most often on hatch cover and cargo access installations, which is useful context even where a specific model has not been verified against a datasheet:
- Cleat or securing-device faults causing incomplete closing pressure or loose panels
- Hydraulic cylinder seal leaks
- Hinge pin wear
- Side rail wear strip deterioration
- Panel hinge pin elongation
- Drain channel blockage
- Gasket hardening
- Coaming drain valve corrosion
Vessel types most often linked to this equipment category in the library are offshore supply vessels, handysize bulk carriers, general cargo vessels, panamax bulk carriers, handymax bulk carriers and bulk carriers generally, which fits the pattern of cargo hatch covers being a bulk and general cargo concern rather than a tanker or container one. Recorded service notes point in a consistent direction: hose or weathertightness testing on a fixed interval, gasket and packing replacement tied to measured compression rather than a calendar alone, and hinge, interlock and drain-channel checks folded into routine survey and cargo-operation preparation. One note calls for a hose test every 6 months with packing rubbers replaced once compression drops under a set threshold, plus an ultrasonic tightness check; another calls for annual hinge pin inspection and drain channels cleared before every cargo operation; a third ties a full weathertightness test to the annual survey with gasket replacement at dry-dock; a fourth specifies a quarterly hose test with compression bars replaced on a 5-year cycle; and a fifth calls for monthly lubrication of the interlock mechanism with a visual check of panel edges for wastage.
Where to find service and supply
Our supplier directory holds 732 firms whose profile text mentions doors, hatches, windows or outfitting. That is a text match on profile content rather than a filtered list of specialist manufacturers or service workshops, so it is worth reading with that in mind: a meaningful share of the 732 entries are shipping and ship-management companies whose fleet descriptions reference open hatch bulk carriers, owned deck cranes and similar outfitting terms, rather than firms that build or service doors, hatches and windows themselves. Country distribution in this pool is led by the United States with 131 firms, followed by China with 83, the Netherlands with 56, Germany with 48, Italy with 40, the United Kingdom with 33, Spain with 24 and Turkey with 21.
Examples drawn from the directory illustrate the mix rather than a shortlist of recommended suppliers. Oldendorff Asia, based in Singapore, and Byzantine Maritime Corporation (BMC), based in Greece, both carry profile text describing geared bulk carrier fleets with owned deck cranes. F H Bertling Georgia, based in Georgia, and Akaylar Deniz Nakliyat A.S., based in Turkey, show a similar pattern. Anyone using this directory to locate an actual door, hatch or window manufacturer or repair yard should treat these entries as a starting point for direct verification, not as a pre-qualified supplier list.
How to use this when specifying or buying
- Identify which certificate group applies to the vessel and trading area before ordering: Marine Equipment Directive or Marine Equipment Regulation for SOLAS-class merchant ships trading into the European Union or United Kingdom, Recreational Craft Directive for smaller leisure or workboat fittings.
- Request the current certificate from the manufacturer rather than relying on register status alone; 3 of the 217 entries in this register already show as expired.
- Check the certificate expiry date against the delivery or dry-dock schedule, especially where the schedule runs into the 2027 to 2030 window where expiries concentrate most heavily in this data.
- Treat any certificate with a nominal expiry date of 2050 or later as needing direct confirmation with the manufacturer before it is used in a purchasing decision.
- Match the exact product type wording on the certificate against the register listing, since fireproof window and side scuttle approvals appear under more than one near-identical spelling in this data.
- For hatch cover control systems, check the equipment library for a datasheet-backed model before accepting undocumented technical claims from a supplier.
- Use the manufacturer country spread as a starting point for sourcing alternatives: with 13 manufacturers in China, 9 in Norway and 6 in Germany holding approvals in this register, a second source is rarely far from the incumbent supplier's country.
Frequently asked questions
How many manufacturers of doors, hatches and windows are in the register?
50 manufacturers hold approvals for weathertight and watertight doors, hatches, portlights and fireproof windows in our type-approval register, covering 217 products between them.
Which certificate scheme covers the most products?
The Marine Equipment Directive covers the largest share in our register, with 90 products, ahead of Type Approval with 86, the Recreational Craft Directive with 35 and the Marine Equipment Regulation with 6.
Are all the certificates in the register still valid?
Most are: 214 of the 217 certificates in this register are recorded as valid, with 3 shown as expired. A small cluster of entries also carries nominal expiry dates far in the future and should be treated with caution rather than used for planning.
Does the equipment library show how many hatch cover models exist in total?
No. Total model counts for the Hatch Covers & Cargo Access category are not reliable enough to quote. Only the datasheet-checked figures are used here: 1 model with a verified datasheet, from MacGregor, and 0 models with verified key figures.
This article is provided for general information and education. It does not replace professional advice.
Dieser Artikel wurde mit Unterstützung eines KI-Systems erstellt und vor Veröffentlichung von der Redaktion geprüft.
Weitere Ratgeber in „Register-Auswertungen“
Das erfahren Sie
Marine Diesel and Dual-Fuel Engines: What Our Type-Approval Register Shows
A data-based look at who holds type approvals, verified datasheets and supply contacts for marine diesel and dual-fuel engines and drives.
Das erfahren Sie
Marine Valves: What Our Type-Approval Register Shows
Type approvals, manufacturers, expiry dates and verified datasheets for marine valves, compiled from our own register and directory data.
Das erfahren Sie
Marine Automation and Control Systems: What the Approvals Register Shows
A data-based look at DNV-approved automation and control equipment, certificate status, and where to source service support.